Mar 01, 2024  
2015-2016 Graduate Catalog 
2015-2016 Graduate Catalog [Not Current Academic Year. Consult with Your Academic Advisor for Your Catalog Year]

Electrical Engineering, M.E.E.

Return to {$returnto_text} Return to: Graduate School

Colleges  > Cullen College of Engineering  > Department of Electrical and Computer Engineering  > Electrical Engineering, M.E.E.


The Master of Electrical Engineering (MEE) program is a non-thesis master’s program, which provides advanced level instruction emphasizing engineering practice.  The MEE program offers an opportunity for the practicing electrical engineer to obtain a graduate level degree having a focus on engineering design, systems operation, manufacturing, and management.  The opportunity exists in the MEE program for specialization in one of four areas of strength in the Department of Electrical and Computer Engineering.  These areas are:  Control and Power Systems, Electromagnetics and Microelectronics, Electronics and Computers, and Signals and Communications.  In addition, the student can select from non-electrical engineering courses, including courses in the Cullen College of Engineering, the College of Business Administration, and the College of Natural Sciences and Mathematics.  In this way, engineering disciplines as well as areas such as Management, Mathematics, and Computer Science are included in the program.  The option exists for the completion of a project on a practical engineering problem under the supervision and guidance of a faculty member.


Admission Requirements    
  1. Unconditional Admission  
  2. Conditional Admission  
General Requirements    
  1.Transfer of Credits  
  2. Official Advisor  
  3. Advising  
  4. Enrollment Hours  
  5. Reduced Course Load  
  6. Cumulative Grade Point_Average (GPA)  
  7. Major Grade Point Average (MGPA)  
  8. Change of degree objective plan within the department  
  9. Change of major  
  10. Curricular Practical Training (CPT)  
  11. Notes  
General Course and Program Requirements


1. Course Requirements
2. Industrial Power Systems (IPS) program


Admission Requirements

 1. Unconditional Admission:

  • A bachelor’s degree in Electrical Engineering, or in a closely related field, from an accredited institution, with a grade point average of at least 3.0/4.0 (or equivalent) for the last 60 hours of the undergraduate degree and on any coursework completed since graduation.
  • General GRE scores must be submitted.  While no minimum GRE scores are used to exclude students, typically students entering the program have GRE scores greater than 150 on the Verbal, greater than 159 on the Quantitative, and greater than 4.0 on the Writing Assessment.
  • International students must submit an official TOEFL score of 92 or better.
  • Three letters of recommendation on official letterhead with mailing address, phone and fax numbers, and e-mail of the recommender.

2. Conditional Admission:

  • Same as above, except the grade point average may be between 2.6 and 3.0 with high GRE scores.
  • Must be a citizen or permanent resident of the United States.
  • The conditionally admitted student must earn a grade point average of at least 3.0 on the first 12 semester hours of graduate work after enrolling at the University of Houston.  A general petition needs to be submitted to change conditional admission status after the first 12 hours.



1. Transfer of Credits

A student may transfer up to 6 hours of graduate-level work completed elsewhere or at the University of Houston upon the approval of the Director of Graduate Studies.  The student will need to file a general petition within one semester after admission to graduate program.

(Courses in Technology programs cannot be transferred.)

2. Official Advisor

The Graduate Director will serve as your official advisor at the beginning of the program.  Students may declare any ECE faculty member as an official advisor on a general petition at any time during the course of the program.

If a student wishes to change his/her advisor, the initial advisor must approve the change to a new advisor via general petition, with both the old and new advisor signature

3. Advising

Graduate advising is mandatory upon admission into the graduate program in Electrical and Computer Engineering, both prior to the first registration and in subsequent semesters.  The official advisor should approve all proposed coursework during registration cycles before each academic semester. 

4. Enrollment Hours

Early enrollment is highly recommended for all students.  Classes fill up quickly and may not be available during the early semester rush.  Department enrollment deadlines as well as the official calendar are posted on the Department web site.  General information on supported enrollment hours can be found at the following college website,

Be aware that courses taken for personal enrichment will not be counted towards the degree plan and must be approved by the advisor and the Director of Graduate Studies prior to enrollment.  Enrichment hours cannot be used towards the required total number of hours when an assistantship is being received.

  • Non - supported (US/Int’l.) students must maintain enrollment of at least 3 hours (US) or 9 hours (international) during each Fall/Spring semester.  Summer enrollment is not necessary (no special permission is required).
  • Supported (US/Int’l.) students must enroll full time in each semester (i.e., Fall, Spring - 12 Hours, and Summer - 6 Hours).

See details at

5. Reduced Course Load

Requests to enroll below the minimum number of hours required may be granted for non-supported students on a one-time basis.  Students must have filed an approved degree plan showing that all degree requirements have been met and a reduced course load form from the ISSSO office (Int’l only).

Reduced course load may be requested for a one-time approval.  Students are required to enroll full time if additional semesters are needed. 

Please note that full-time enrollment prior to the start of the semester is required for all students seeking an exception to enrollment requirements.  The Department will adjust the enrollment once the petition to enroll below the minimum hours has been approved. 

6.Cumulative Grade Point Average (GPA)

This average is on all courses attempted at the university during the graduate program.  Students must maintain an overall GPA of 3.0 or better in order to remain in good academic standing for the graduate program.  An academic stop will be placed on the student record when he/she fails to maintain this average.  The student will receive an academic letter from the department outlining the reinstatement procedure each semester until the GPA has reached 3.0 or better.  At that time, he/she must seek the academic advisor’s assistance on the removal of this stop for future enrollment.

  • Cumulative Grade Point Average (GPA) for supported students:
    • The cumulative GPA must be 3.0 or better at all times in order to maintain eligibility for assistantships or in-state tuition waivers when applicable.
  • Cumulative Grade Point Average (GPA) for scholarship students:
    • The cumulative GPA must be 3.0 or better at all times in order to receive the in-state tuition waiver.  If you do not meet this requirement, you will lose the scholarship and no longer be eligible for in-state tuition.  If you drop below the 3.0 GPA in the first semester, you may not receive the 2nd installment of the scholarship.

7 Major Grade Point Average (MGPA)

This average is only on courses that are on the student’s degree plan.  Students must maintain a MGPA of 3.0 prior to applying for graduation.

8. Change of Degree Objective/Plan within the department

Students seeking a change in degree plan will need to submit a general petition to officially request such a change.  The current advisor must initially approve the general petition.  The general petition must be submitted well in advance for the plan change and will only be effective in the upcoming semester.  A petition will not be processed once a new semester has already begun.  Students on visa must notify ISSSO when a change of major has been approved.  Change in degree objective request can be submitted one time.

9. Change of major

Students who have an interest in another major must file an approved general petition from the other Department to the ECE Department in order to have files transferred to the new Department.  An academic stop will remain on student’s record until this procedure is completed.


10. Curricular Practical Training (CPT)

The purpose of curricular practical training (CPT) is to gain practical insight as a part of the student’s academic program; therefore, it must be considered as “an integral part of an established curriculum.”

The ECE Department will allow up to six (6) hours of CPT (“internships”) in the following situations:

  1. A CPT Form  is submitted before the start of the semester in which the student intends to participate in an internship.  The Form must include a formal job offer on the hiring company’s stationary, a description of the work to be performed, a beginning and ending date, and the salary offered.
  2. The work must be related to the practice of electrical and/or computer engineering.
  3. Upon approval of the general petition, the participating student enrolls in ECE 6392  or ECE 7392  .
  4. Students enrolled in internship courses will meet monthly at UH to present oral progress reports and to discuss issues related to their internship experience at the discretion of the Graduate Program Director.
  5. A final report, describing the work performed, must be submitted within two weeks of the conclusion of each semester’s enrollment in ECE 6392  or ECE 7392 .
  6. Only half-time employment is allowed during Fall and Spring semesters. Full-time employment is allowed during the Summer semester.
  7. ECE 6392  and ECE 7392  cannot be repeated.

MEE students can elect to replace two three-hour non-core courses by ECE 6392  and ECE 7392 .  Non-core courses are those regularly-scheduled courses in NSM, Computer Science, the Business School, or Engineering other than ECE, which are currently acceptable to meet the MEE degree requirements.  ECE 6392  and ECE 7392  cannot be used as a substitute for any of the six ECE courses required to meet the “area of concentration” requirements.

CPT will not be approved under any other circumstances.  All procedures must be approved by the ECE department prior to approval by any other offices.  CPT COOP is not part of the MEE degree program.

For more information on the College and University requirements regarding CPT, please review websites indicated below.


11. Notes

The student should refer to the Graduate and Professional Studies Catalog for other requirements and regulations such as course load, time limitations,Low Grade Policy,   Nothing in this document is intended to supersede or supplant the regulations set forth by the University of Houston in the Graduate and Professional Studies Catalog.


General Course and Program Requirements

To receive the degree, Master of Electrical Engineering, the student is required to complete (on a part-time or full-time basis), with a grade point average of at least 3.0, a minimum of 36 semester credit hours of approved graduate courses.  There is no thesis requirement.  However, a maximum of two courses (i.e., a maximum of 6 hours of coursework) taken from Course Categories A and B (see below) can be replaced by an approved project to be completed under the supervision of a faculty member from the Electrical and Computer Engineering Department.

 Special Projects

Special projects require a committee consisting of at least two regular, tenure-track, ECE faculty, one of which will serve as project advisor.  A student desiring to do a special project needs to identify the project advisor and the other committee member(s).  The student should prepare a project description and secure approval from the committee members.  A general petition together with the approved project description should be filed well in advance of the start of the semester in which the special project will take place.  Once the Director of Graduate Studies has approved the project and project committee, the student may enroll in ECE 6393 .

At the end of the semester, the student must prepare a written report, which must be successfully defended in the presence of the committee.  If desired, and warranted by the progress made, the student may request (through a general petition) to enroll in ECE 7393  for another semester to continue work on the project.  This request should be made through a general petition, accompanied by the approved progress report and a statement of work to be accomplished.  Such requests must be made at least three weeks before the start of the semester.


Course Requirements

To receive the degree of Master of Electrical Engineering, the student is required to complete, with a grade point average of at least 3.0/4.0, a minimum of 36 semester credit hours.  Specifically:

Group A.  Six to nine hours of course work from courses offered in the College of Engineering or in the College of Business Administration.

  1. The non-ECE courses must be at the 4000-level or higher.
  2. Courses in ECE must be at the 5000-level or higher.
  3. In all cases, no credit will be given for courses that are equivalent to courses used in the student’s undergraduate degree.
  4. Business courses should be selected from the approved list (see below).
  5. Other courses may only be used in this category with the prior approval of the Director of Graduate Studies.

Group B.  Nine to twelve hours of course work from courses offered outside the student’s specialization in  ECE, in the College of Engineering or in the College of Natural Sciences and Mathematics.

  1. These courses must be at the 4000-level or higher, and should be selected from the approved list (see below).
  2. Other courses may only be used in this category with the prior approval of the Director of Graduate Studies.

Group C.  A minimum of 18 hours of course work from 6000-level or higher ECE courses.

  1. All the courses in this category must be chosen from one of the four specialization areas, as described below.
  2. Other courses may be used in this category only with the prior approval of the Director of Graduate Studies.
Approved List of Non-ECE Courses

College of Engineering:

  • All courses at the 4000-level or higher.
  • Note: Engineering College 4000-level courses may not have graduate level credit.  In this case, a general petition must be submitted to request a change to graduate level.

College of Natural Sciences and Mathematics:

College of Business Administration:

  • All courses at the 6000-level or higher, with the exception of any courses in General Business Administration (GENB).


Important Note:  Course(s) that do not receive a letter grade, but are graded S, U, or W will not be counted towards the degree plan.

Non-ECE Courses with Similar Content to ECE Courses

In case a graduate level (6000 or above) course exists outside of ECE with similar content to a regularly offered ECE graduate course, graduate ECE students must take the ECE version.  If the course in question is not offered regularly, or in the graduating semester, then the students may be allowed to take the non-ECE version by general petition.  Please see deadline on the Department calendar.

Under no circumstances will graduate credit be awarded for both the ECE and non-ECE version of the course.  Courses offered at other institutions such as Rice University/UT Health, etc. may be available for enrollment, however, prior approval from both advisor and the Graduate Director is required and additional forms from the other institution are required.  Students must take coursework if available at our main campus.  Complete a general petition and an inter-institutional form for the process. Refer to the University website below for more information.

Industrial Power Systems (IPS) Specialization

The Industrial Power Systems is a graduate level program, providing advanced and specialized training of industrial power systems engineers, who are typically working in an environment that recently experienced the need for an increase in breadth and depth of knowledge.

The program was developed at the power industry’s request, and with a significant participation of prominent electrical industry representatives from the Houston area.  The program covers the most needed topics for industry, and also takes advantage of Houston’s recognized international leadership in industrial power systems design.

The specific courses in this program are offered as evening classes, and are taught by instructors with significant industrial experience.

It is also noted that the MEE program can be counted as one year’s experience towards registration as a Professional Engineer.  Also, for those who do not wish to pursue the MEE degree, the classes can be taken as a Non Degree Objective (NDO) student.


Details about the course and program requirements are shown on the section “General Course and Program Requirements” of the department’s MEE Program above.

To meet the requirements for the MEE-Industrial Power Systems specialization, eighteen hours (6 courses) should be selected from specific and other power-engineering courses listed below.

Specialization Total: 18.0 Credit Hours

Telecommunications specialization

Specialization Total: 36.0 Credit Hours

Return to {$returnto_text} Return to: Graduate School